Calculiva Cut Planner

Reviewed 3h ago.

• tools: 4 tools scanned
• metadata: scanned

No findings.

Tools (4)

• plan_trim_order

  Plans board and batten, wainscoting or picture frame molding on one wall: spacing, the cut list (miter long and short points for frames) and how many boards of each retail length to buy, with the total length bought and offcut percentage for each stock length; the length to buy is the one that buys the least total length, then the least offcut, then the fewest boards. The cut plan is first-fit decreasing: feasible, not proven optimal. Lengths accept feet and inches. Returns a link to the full plan on calculiva.com.

• plan_wallpaper_order

  Counts the wallpaper rolls to buy from the walls, doors and windows and the roll label (width, length, pattern repeat, match): drops per roll, every cut placed on its roll, match waste, and the straight / half-drop / random comparison. Lengths accept feet and inches. Returns a link to the full plan on calculiva.com.

• plan_flooring_order

  Plans laminate, vinyl plank (LVP) or engineered plank flooring for 1 to 12 rooms, rectangles or L shapes, with the plank size and planks per carton from the carton: cartons to buy, every cut piece traced to its source plank, offcuts carried from one room to the next, the 8 scenarios (direction x offset 1/3 or 1/2 x reuse, plus aligned joints in the chosen direction when offset 0 is chosen) and the best one when no other ties it (fewest cartons, then least offcut, then fewest planks), and how many planks a flat waste allowance would miss. Up to 3,000 planks per call. Lengths accept feet and inches. Returns a link per room to the full plan on calculiva.com.

• build_order_sheet

  Builds one consolidated order sheet from the flooring, trim and wallpaper plans of the same project (pass the same arguments as plan_flooring_order, plan_trim_order and plan_wallpaper_order): cartons, boards per stock length, rolls, total offcuts, the cut list by material and a CSV. Trim pieces of all walls and all types (battens, rails, chair rail, frames) are packed together on the stock boards, and the sheet compares that with one order per wall, each wall on its own best stock length (total length bought, then offcut, then boards).