Arcadia Finance

Reviewed Jan 1, 2000.

• tools: 35 tools scanned
• metadata: scanned
• packages: 1 checked

No findings.

Tools (35)

• read_account_info

  Get full overview of an Arcadia account: health factor, collateral value, debt, deposited assets, liquidation price, and automation status. Health factor = 1 - (used_margin / liquidation_value): 1 = no debt (safest), >0 = healthy, 0 = liquidation threshold, <0 = past liquidation. Higher is safer. The `automation` object reports which asset managers are enabled (rebalancer, compounder, yield_claimer, cow_swapper, merkl_operator, gas_relayer), each as the position's dex_protocol when protocol-specific or true when account-level, plus `inferred_intents` (the automations those managers add up to), `merkl` claim state, and `deprecated_managers` for any superseded deployment still set on the account. Superseded managers should be cleared: write_account_automations disables them as part of a save. For the full decoded per-manager config use read_asset_manager_current. LP positions in assets[] include a dex_protocol field (slipstream, slipstream_v2, slipstream_v3, staked_slipstream, staked_sli

• read_account_history

  Get an Arcadia account's historical net value over time. Returns a time series of snapshots, oldest first, each `{ timestamp, net_value }` — `timestamp` is unix seconds and `net_value` is USD (human-readable, not raw units). Useful for charting account performance over a period. An empty `history` means the account has no snapshots in the window, not that the read failed.

• read_account_pnl

  Get PnL (cost basis) and yield earned for an Arcadia account. Returns lifetime totals: cost basis vs current value (negative cost_basis = net profit withdrawn), net transfers per token, total yield earned in USD and per token. cost_basis, current_value, cost_diff are in USD (human-readable). Per-token fields (net_transfers, summed_yields_earned) are in raw token units.

• read_pool_list

  List all Arcadia lending pools: TVL, utilization, available liquidity. Key fields: interest_rate = current borrow cost, lending_apy = lender yield. All rates are decimal fractions (1.0 = 100%, 0.06 = 6%). For APY history on a specific pool, use read_pool_info.

• read_pool_info

  Get detailed info for a single lending pool including APY history over time. Useful for analyzing rate trends and comparing pools. Use read_pool_list to discover pool addresses.

• read_asset_list

  List supported collateral assets on Arcadia. Returns compact list (address, symbol, decimals, type). Use search to filter by symbol substring. For USD prices, use read_asset_prices.

• read_asset_prices

  Get USD prices for one or more asset addresses. Pass a single address or comma-separated addresses. Returns a price map keyed by address.

• read_strategy_list

  Get Arcadia LP strategies. Use featured_only=true for curated top strategies (recommended first call). Returns a paginated list with 7d avg APY for each strategy's default range. Increase limit or use offset for pagination. All APY values are decimal fractions (1.0 = 100%, 0.05 = 5%). For full detail on a specific strategy (APY per range width), use read_strategy_info.

• read_strategy_info

  Get full detail for a specific LP strategy by ID — includes APY per range width (narrower range = higher APY but more rebalancing cost/risk), pool info, and configuration. Use read_strategy_list to discover strategy IDs. All APY values are decimal fractions (1.0 = 100%, 0.05 = 5%).

• read_strategy_recommendation

  Get a rebalancing recommendation for an Arcadia account — suggests asset changes to optimize yield. Uses 1d APY (not 7d like read_strategy_list), so recommended strategies may differ from the list ranking. APY values are decimal fractions (0.05 = 5%). weekly_earning_difference is in USD.

• read_point_leaderboard

  Get the Arcadia points leaderboard (paginated). For a specific wallet's points balance, use read_wallet_points.

• read_guides

  Get Arcadia workflow guides and reference documentation. Call this before multi-step workflows (opening LP positions, enabling automation, closing positions) or when you need contract addresses, asset manager addresses, or strategy parameters. Topics: overview (addresses + tool catalog), automation (intent-based automation setup), strategies (step-by-step templates), selection (how to evaluate and parameterize strategies).

• read_wallet_balances

  Get native ETH and ERC20 token balances for a wallet address. Reads directly from chain via RPC multicall. Use before write_account_add_liquidity or write_account_deposit to verify the wallet has sufficient tokens. Returns both raw balance (smallest unit/wei) and formatted (human-readable) per token.

• read_wallet_allowances

  Check ERC20 token allowances for a spender address. Use before write_wallet_approve to avoid redundant approvals — skip approving if the current allowance is already sufficient.

• read_wallet_accounts

  List all Arcadia accounts owned by a wallet address. Returns a summary of each account (address, name). Call read_account_info with a specific account_address for full details like health factor, collateral, and debt.

• read_wallet_points

  Get Arcadia points balance for a specific wallet address.

• read_asset_manager_intents

  List the automation intents Arcadia supports, with the parameters each one accepts. Pass account_address to also get per-account availability: which intents can be enabled right now and, for any that cannot, the compatibility rule blocking it. Pass position_id as well to scope availability to one LP position. Without account_address this returns the catalog only.

• read_asset_manager_current

  Read which asset managers are currently enabled on an account, with their decoded on-chain configuration. Returns the active managers (address, protocol, initiator, decoded strategy metadata, slippage and value-loss caps, fee recipient), the intents they map to, and Merkl claim state including whether reward tokens still need registering. Managers from superseded deployments are listed separately under `deprecated`: pass their addresses to write_account_automations_delta to clear them, or run write_account_automations which disables them as part of the save. read_ok is false when chain state could not be read, in which case the result is unreliable rather than empty.

• write_account_create

  Build an unsigned transaction to create a new Arcadia account via the Factory contract. account_version: 3 with creditor → V3 margin account (can borrow/leverage). account_version: 0 or 4 → V4 spot account (no borrowing, creditor is ignored, any ERC20 allowed). Returns the predicted account address (deterministic via CREATE2).

• write_account_deposit

  Build an unsigned transaction to deposit assets into an Arcadia account as collateral. Supports ERC20 tokens and ERC721 NFTs (LP positions). NOT needed before write_account_add_liquidity — that tool deposits from wallet atomically. Ensure the account is approved first (call read_wallet_allowances to check, then write_wallet_approve if needed). Account version is auto-detected on-chain (override with account_version if needed).

• write_account_withdraw

  Build an unsigned transaction to withdraw assets from an Arcadia account to the owner's wallet. Only the account owner can withdraw. Will revert if the account has debt and withdrawal would make it undercollateralized. Does not support max_uint256 — pass exact amounts from read_account_info. Account version is auto-detected on-chain (override with account_version if needed).

• write_account_borrow

  Build an unsigned transaction to borrow from an Arcadia lending pool against account collateral. NOT needed for leveraged LP — write_account_add_liquidity handles borrowing internally when leverage > 0. Only works with margin accounts (created with a creditor/lending pool). Spot accounts (no creditor) cannot borrow — the tool will validate this and reject. Before borrowing, verify the account has positive free margin via read_account_info: collateral_value must exceed used_margin.

• write_account_repay

  Repay debt to an Arcadia lending pool using tokens from the wallet (requires ERC20 allowance). To repay using account collateral instead (no wallet tokens needed), use write_account_deleverage. Check allowance first (read_wallet_allowances), then approve the pool if needed (write_wallet_approve). Check outstanding debt with read_account_info.

• write_account_add_liquidity

  Multi-step flash-action: atomically combines [deposit from wallet] + [use account collateral] + [swap to optimal ratio] + [mint LP] + [borrow if leveraged] in ONE transaction. Do NOT call write_account_deposit separately. Capital sources: wallet tokens (deposits array), existing account collateral (use_account_assets=true), or both. Check allowances first (read_wallet_allowances), then approve if needed (write_wallet_approve). Supports depositing multiple tokens and minting multiple LP positions in one tx. Works with both margin accounts (can leverage) and spot accounts (no leverage). For workflows, call read_guides('strategies'). The returned calldata is time-sensitive — sign and broadcast within 30 seconds. If the transaction reverts due to price movement, rebuild and sign again immediately (retry at least once before giving up). Response includes tenderly_sim_url and tenderly_sim_status for pre-broadcast validation. expected_value_change is in raw units of the account's numeraire to

• write_account_remove_liquidity

  Flash-action: PARTIALLY decreases liquidity from an LP position. The position remains open with reduced liquidity; underlying tokens stay in the account. For FULL position exit (burn LP + swap + repay + withdraw), use write_account_close instead — it batches everything into one atomic transaction. The returned calldata is time-sensitive — sign and broadcast within 30 seconds. If the transaction reverts due to price movement, rebuild and sign again immediately (retry at least once before giving up). Response includes tenderly_sim_url and tenderly_sim_status for pre-broadcast validation.

• write_account_swap

  Flash-action: swaps assets within an Arcadia account in one atomic transaction. The backend finds the optimal swap route. NOTE: If you are closing a position (swap + repay + withdraw), prefer write_account_close which batches everything atomically. Only use this tool for standalone swaps within an active position. The returned calldata is time-sensitive — sign and broadcast within 30 seconds. If the transaction reverts due to price movement, rebuild and sign again immediately (retry at least once before giving up). Response includes tenderly_sim_url and tenderly_sim_status for pre-broadcast validation — if tenderly_sim_status is 'false', do NOT broadcast the transaction.

• write_account_deleverage

  Multi-step flash-action: sells account collateral to the debt token and repays in one atomic transaction — no wallet tokens needed. To repay from wallet tokens instead, use write_account_repay. NOTE: If you are closing a position (remove LP + swap + repay + withdraw), prefer write_account_close which batches everything atomically. Only use this tool for standalone repayment while keeping the position active. The returned calldata is time-sensitive — sign and broadcast within 30 seconds. If the transaction reverts due to price movement, rebuild and sign again immediately (retry at least once before giving up). Response includes tenderly_sim_url and tenderly_sim_status for pre-broadcast validation — if tenderly_sim_status is 'false', do NOT broadcast the transaction.

• write_account_stake

  Flash-action: stake, unstake, or claim rewards for an LP position in one atomic transaction. Use the `action` parameter to select the operation. `asset_address` is the position manager contract — pass the non-staked PM address when staking, or the staked PM address when unstaking. The returned calldata is time-sensitive — sign and broadcast within 30 seconds. If the transaction reverts due to price movement, rebuild and sign again immediately (retry at least once before giving up). Tenderly simulation may not be available for this endpoint — verify the position exists with read_account_info before signing.

• write_account_close

  Atomic flash-action that closes an Arcadia account position in ONE transaction. Combines up to 3 steps atomically: [burn LP position] + [swap all tokens to a single target asset] + [repay debt]. Tokens remain in the account after closing — use write_account_withdraw to send them to your wallet. ALWAYS try this tool first when closing/exiting a position. Only fall back to individual tools (write_account_remove_liquidity, write_account_swap, write_account_deleverage, write_account_withdraw) if this tool fails. Supports two modes: - close_lp_only=true: Burns LP and leaves underlying tokens in the account. Use as step 1 if the full close fails, then call again with close_lp_only=false to swap+repay the remaining tokens. - close_lp_only=false (default): Full atomic close — burns LP, swaps everything to receive_assets, repays debt. Remaining tokens stay in the account. Follow up with write_account_withdraw to send to wallet. Supports multiple receive assets with custom distribution. The r

• write_wallet_approve

  Build an unsigned approval transaction. For ERC20 tokens: generates approve(spender, amount). For ERC721/ERC1155 NFTs (e.g. LP positions): generates setApprovalForAll(operator, true). Required before write_account_deposit or write_account_add_liquidity (when depositing from wallet). Tip: call read_wallet_allowances first to check if approval already exists — skip this if the current allowance is sufficient.

• write_pool_deposit

  Build an unsigned deposit transaction into an Arcadia lending tranche (ERC-4626). Lenders deposit the pool's underlying asset (USDC/WETH/cbBTC) and receive tranche shares that accrue interest from borrowers. Requires prior ERC-20 approval to the tranche (see write_wallet_approve). To check current lender yield, call read_pool_list or read_pool_info.

• write_pool_redeem

  Build an unsigned redeem transaction to withdraw from an Arcadia lending tranche (ERC-4626). Burns tranche shares and returns the corresponding amount of underlying asset, including accrued interest. The owner must be the shares holder; receiver is where the underlying asset is sent.

• write_account_automations

  Configure an account's automations from a list of intents and return the unsigned setAssetManagers transaction. The backend resolves which asset managers each intent needs, validates that the combination is compatible, encodes the metadata and builds the calldata, so you describe the desired outcome rather than the contracts. With mode 'save' (the default) the intents array is the complete desired state: the backend diffs it against what is currently enabled, so any automation you leave out is DISABLED by the returned transaction. Pass a single intent with enabled: false to turn everything off. Mode 'preview' validates and resolves the intents WITHOUT reading chain state and returns no transaction, because its calldata carries no disable entries and would only partially apply the state. Use it to check a combination is legal or to show a plan; use 'save' to get something signable. To toggle one automation without restating the rest, use write_account_automations_delta. Intents: - co

• write_account_automations_delta

  Apply an explicit change to an account's automations and return the unsigned setAssetManagers transaction. Unlike write_account_automations this is a delta, not a full desired state: automations you do not mention are left untouched. Use it to switch one automation on or off without restating the others. The enable array takes intents to switch on (same shapes as write_account_automations). To turn an automation OFF, call read_asset_manager_current, take the address of the manager serving it, and pass that address in the disable array: an intent with enabled: false in `enable` is rejected because the backend would ignore it. Superseded or unreadable managers still set on the account are force-disabled in the same transaction regardless. Intents: - compound_fees: reinvest earned fees/rewards back into the LP. Optional 'tokens' scopes it per yielding token. A staked reward that is not a pool token is swapped in via CowSwap automatically. - claim_rewards: claim yield out. config.mode as

• dev_send

  DEV ONLY — Sign and broadcast an unsigned transaction using a local private key (PK env var). For production, use a dedicated wallet MCP server (Fireblocks, Safe, Turnkey, etc.) instead of this tool. Takes the transaction object returned by any write.* tool and submits it onchain.